Cost guides
What chimney costs for chimney.
What chimney costs
Prices in this category are quoted per unit — per square foot, per linear foot, per pier, per job — and the unit is where most quotes become incomparable. The table below is the range we verified in November 2026, with what each line includes.
| Job | Typical range | Notes |
|---|---|---|
| Chimney sweep | $150–$400 | Per flue, depending on access |
| Level 1–3 inspection | $150–$800 | Level 3 includes camera and access |
| Stainless liner | $1,500–$4,000 | 30–50 ft, insulated |
| Chimney cap | $150–$600 | Stock or custom |
| Crown repair | $400–$1,500 | Cracks and spalling |
| Partial rebuild | $5,000–$15,000 | Above roofline |
What moves the price
- Access. Height, water, tight side yards and finished interiors all add labour.
- Prep. Cleaning, grinding, draining or removing an old system is often the largest hidden line.
- Materials. The same job in a premium finish can double the material cost.
- Permits and disposal. $100–$800 depending on the jurisdiction and the waste stream.
- Season. Spring and autumn are busy; February is not.
What a quote should show
Ask for the same five lines from every contractor: unit price and quantity, prep included, materials by brand, permits and disposal, and the warranty. A quote that only shows a total is a price, not a scope.
The methods hub explains what each option actually does, and the problems hub starts with the diagnosis every quote should follow.
Is the cheapest quote a red flag?
Usually it is a scope difference — less prep, no permit, thinner material. Compare the five lines, not the total.
How long is a quote valid?
30 days is common; material prices move. Ask what happens if you sign after the window.
All cost guides
Animal nests: what a fix costs
Animal nests: what a fix costs: practical numbers, costs, and trade-offs, written independently.
Read the guide →
Cast-in-place liner cost: per-foot pricing and totals
Cast-in-place liner cost by the foot, what drives the number, and how it compares with a stainless reline. Each figure comes with its arithmetic.
Read the guide →
Chimney cleaning cost: $150 to $400 per flue
What a chimney cleaning costs by flue count and creosote level, why the quote moves, and how to compare two estimates line by line.
Read the guide →
Chimney cost per square foot: real numbers
Chimney work is quoted by the job, not by area, but the per-square-foot math still works for budgeting. Here is how to derive it from real installed prices.
Read the guide →
Understanding Your Chimney Crown Repair Cost
Get clear pricing for a chimney crown repair. We break down costs, materials, and what drives the price so you can budget safely.
Read the guide →
Chimney inspection cost by level, explained
A chimney inspection costs $150 to $800 depending on level. What Level 1, 2, and 3 each cover, when you actually need the camera, and how to read the report.
Read the guide →
Chimney leak: what a fix costs
Chimney leak repair costs $150 to $600 for a cap, $400 to $1,500 for flashing or a crown, and $1,500 to $4,000 for a liner. Cost by water path.
Read the guide →
Chimney liner cost: what each type actually runs
Stainless, clay tile, cast-in-place, and aluminum liners priced side by side, with the per-foot arithmetic and the costs that sit outside the quote.
Read the guide →
Chimney rebuild cost: $5,000 to $15,000, itemized
What a partial or full chimney rebuild includes, the per-foot arithmetic behind the range, and the findings that decide between rebuilding and relining.
Read the guide →
Chimney relining cost: line items and real totals
A relining quote broken into its line items, the per-foot math behind $1,500 to $4,000, and the flue conditions that push a job past the range.
Read the guide →
Chimney repair cost: every scope, priced
Crown repair runs $400 to $1,500, a stainless liner $1,500 to $4,000, and a partial rebuild $5,000 to $15,000. What each scope covers and three worked budgets.
Read the guide →
Chimney sweep cost: what the $150 to $400 buys
A chimney sweep runs $150 to $400 per flue. What the price includes, how flue count and creosote level change it, and why the cheapest quote is usually the.
Read the guide →
Creosote build-up: what a fix costs
A creosote sweep costs $150 to $400, an inspection $150 to $800, and a stainless liner $1,500 to $4,000. Costs by stage, with worked totals for each.
Read the guide →
Crown rebuild cost: what a new crown actually runs
Crown rebuild cost broken down by materials, labor, and height, with the repair-versus-rebuild line and the point where a partial rebuild takes over.
Read the guide →
Downdraft and smoke: what a fix costs
Downdraft and smoke: what a fix costs: practical numbers, costs, and trade-offs, written independently.
Read the guide →
Flashing repair cost: what the roof line runs
Chimney flashing repair commonly runs $400 to $1,500 with access, the same band as crown repair. What drives the price and when a rebuild is needed.
Read the guide →
How much does chimney cost?
How much does chimney cost?: practical numbers, costs, and trade-offs, written independently.
Read the guide →
Is chimney worth it? Repair, rebuild, or close it
A chimney is worth keeping when you burn and the repair is under the rebuild price. It is worth closing when the flue is decorative and the quote passes $5,000.
Read the guide →
Spalling brick: what a fix costs
Replacing a few spalled units and repointing runs $400 to $1,500. A partial rebuild when most of the stack has gone is $5,000 to $15,000. Costs by extent.
Read the guide →
Stainless relining cost: alloy, diameter, per foot
How stainless relining lands between $1,500 and $4,000, what each alloy adds, and the per-foot math for a 25-foot and a 40-foot flue.
Read the guide →
Tuckpointing cost: what repointing runs
Tuckpointing costs $400 to $1,500 for spot repointing and rises toward the $5,000 to $15,000 rebuild band when whole sections are gone. What drives the price.
Read the guide →